-
In order to keep your account secure you should probably enable two-step authentication via email or an app. Go Here
Lct G3 Foregrips
- Thread starter kasaran
- Start date
Yeah they change without any problems. You can even go for a real steel forgrip if you want and it'll just drop in without a problem.
Zib militaria sell real ones starting at about £5.
olive
http://www.zib-militaria.de/epages/61431412.sf/de_DE/?ObjectPath=/Shops/61431412/Products/90583
Black
http://www.zib-militaria.de/epages/61431412.sf/de_DE/?ObjectPath=/Shops/61431412/Products/100060
The real stocks are a different story, The metal part of the stock is slightly different on the real steel one and will not fit. So you have to modify the real stock and put on the LCT metal parts. It can be done with a dremel and some tools in about an hour. Not worth it for the plastic stocks since the LCT one is good anyway. The Wood stocks it was worth it, but those are not available any more.
this is my LCT G3 with the real hardware on it.
Zib militaria sell real ones starting at about £5.
olive
http://www.zib-militaria.de/epages/61431412.sf/de_DE/?ObjectPath=/Shops/61431412/Products/90583
Black
http://www.zib-militaria.de/epages/61431412.sf/de_DE/?ObjectPath=/Shops/61431412/Products/100060
The real stocks are a different story, The metal part of the stock is slightly different on the real steel one and will not fit. So you have to modify the real stock and put on the LCT metal parts. It can be done with a dremel and some tools in about an hour. Not worth it for the plastic stocks since the LCT one is good anyway. The Wood stocks it was worth it, but those are not available any more.
this is my LCT G3 with the real hardware on it.
Last edited by a moderator:
The wide grip is actually more comfortable.
The front of the magwell/Reciever has a big old weld. That weld can rub and nip at your fingers if you are a magwell holder or wedge your little finger onto the magwell for stability.
The bigger fore grip covers this whole welded area.
The slim grip leaves it all exposed and while it's not sharp it will rub. A good pair of shooting gloves stops it all. And you can flatten the welds a little with a small file if you have to, without upsetting the look or durability of the gun at all.
The front of the magwell/Reciever has a big old weld. That weld can rub and nip at your fingers if you are a magwell holder or wedge your little finger onto the magwell for stability.
The bigger fore grip covers this whole welded area.
The slim grip leaves it all exposed and while it's not sharp it will rub. A good pair of shooting gloves stops it all. And you can flatten the welds a little with a small file if you have to, without upsetting the look or durability of the gun at all.
Last edited by a moderator:
Not as far as I'm aware, LCT mags use a slightly different fit to the standard ones.
The mags can be sorted with some internal shimming, Mine have been fine since I sorted them. It took a couple of attempts to get them right. It's just an internal height and position adjustment. It's caused because the BB retention nub sits a little low on the feed tube and engages at random, LCT could have fixed it. My mags all came from the initial 6 months of release.
The mags can be sorted with some internal shimming, Mine have been fine since I sorted them. It took a couple of attempts to get them right. It's just an internal height and position adjustment. It's caused because the BB retention nub sits a little low on the feed tube and engages at random, LCT could have fixed it. My mags all came from the initial 6 months of release.
- Thread starter
- #7
Oh right. So its a case that the tube feeding into the hopup doesnt reach far enough into the mag to reliably depress the nub?
Yup that's all that causes the problem, the high caps feed fine tho.
The way the mags are bent into shape and the plastic internals just don't quite work perfectly together. The internals sit a little low, and have some space to twist away from the feed tube. The internals are only held solid by the fit and one screw into the base plate that slides off. Once you see the issue the fix is pretty easy.
The way the mags are bent into shape and the plastic internals just don't quite work perfectly together. The internals sit a little low, and have some space to twist away from the feed tube. The internals are only held solid by the fit and one screw into the base plate that slides off. Once you see the issue the fix is pretty easy.
Last edited by a moderator:
- Thread starter
- #9
That's not a question I can answer for you.
For me, I wouldn't swap or sell my G3. Far too much time and effort has gone into it. If I sold it I'd want it back instantly.
I can live with the midcaps having the odd issue, because there isn't another G3 on the market that you can compare it to.
For me, I wouldn't swap or sell my G3. Far too much time and effort has gone into it. If I sold it I'd want it back instantly.
I can live with the midcaps having the odd issue, because there isn't another G3 on the market that you can compare it to.
Last edited by a moderator:
Similar threads
