Hello,So my problem is: I bought a brand new airsoft LCT SR3M. I took gearbox out to change for a softer spring. This gun doesn't have quick spring change system so I had to open it. I have opened gearboxes before and everything looked fine for me?* when I put all that back together. I also installed a SHS long aluminium nozzle.When i started shooting, gun acted strangely, like nozzle delaying and so. At first semi shot bullet didn't shot out, after that all semi shots were fine. When i switched to a auto then there were a feeding problems. Nozzle were in different positions in hopup chamber? maybe there were even a double feed or times when bullet didnt flew out at all..Before spring changing, all were fine like normal gun should act. Magazine is brand new aswell and feed auto shots fine. using 9,6 volt battery. 20g bbI'm not a really expert but something to do with bad aoe or do i have install a delay chip?
Lct Delay Problem
- Thread starter 6sh117
- Start date
EvilMonkee
Members
- Feb 17, 2014
- 2,366
- 1,358
Why change the nozzle anyway? Leave it alone till something breaks.
Speedbird_666
AF-UK patch owner
- Jul 28, 2014
- 1,719
- 1,327
Adolf Hamster
Supporters
- Feb 1, 2018
- 7,058
- 2,233
agreed, the whole point of a higher end manufacturer like lct is that odds are the stock nozzle is probably just fine.
i know i'm planing on some lct tinkering in the future but nozzle changing ain't part of it....
EvilMonkee
Members
- Feb 17, 2014
- 2,366
- 1,358
Owning any number of LCT, generally the only thing I do to mine is swap out the hop rubber.
