KS/JG P90 won't fire

[THE FNG]

When I pull the trigger on my KS/JG P90, there is no response at all. A quick look at the motor; there is still no response when the trigger connectors connect, and I have tried this with several batteries to no avail. I've ran less than 200 rounds through the gun itself and have only had it for a few weeks.

Does anybody own one or had any experience with this at all?

Thanks in advance

 

[geoffreym]

try checking the fuse, and the soldering points, otherwise come back.

 

[TPI]

i had one in which if a certain person who used it when i wasn't around would pull the wire out of the Tamiya, Fix = Slide it back in and when Poss Trade for Dean's

 

[THE FNG]

Tried the fuse, wiring and solder points: all fine.

I have found the problem however; the tamiya connector prong had come loose! luckily I have spares and fitted one straight away and it fires perfectly again.

Really sorry for bringing up such a trivial issue, but thanks for the quick replies.