Groot
Members
- Jun 29, 2020
- 582
- 355
Hello all,
This arrived today
https://www.ebay.co.uk/itm/JJ-Airsoft-VSR-10-VSR10-MB02-MB03-Airsoft-Sniper-CNC-Trigger-Set/233659026338?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
Short review. It is excellent. It is a straight clone of the PDI trigger.
Took around 3 weeks to arrive from China.
http://dl.jjairsoft.hk/vsr10-trigger-manual-guide-ja-4730.pdf
Very solid and will do its job far better than the stock trigger unit.
Very easy to put together but having some tweezers will make it a much easier task.
Obviously it is a 90' trigger and if you have the piston, you do not need the additional adapter supplied.
That said, if you have a 45' piston that allows you to unscrew the bottom catching part. You would be good to go.
Only feedback is that you do need to do this mod to lighten the trigger pull.
It will smooth its self out over time. As is, the pull is stiff and a little jerky.
Cheers
Groot
This arrived today
https://www.ebay.co.uk/itm/JJ-Airsoft-VSR-10-VSR10-MB02-MB03-Airsoft-Sniper-CNC-Trigger-Set/233659026338?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
Short review. It is excellent. It is a straight clone of the PDI trigger.
Took around 3 weeks to arrive from China.
http://dl.jjairsoft.hk/vsr10-trigger-manual-guide-ja-4730.pdf
Very solid and will do its job far better than the stock trigger unit.
Very easy to put together but having some tweezers will make it a much easier task.
Obviously it is a 90' trigger and if you have the piston, you do not need the additional adapter supplied.
That said, if you have a 45' piston that allows you to unscrew the bottom catching part. You would be good to go.
Only feedback is that you do need to do this mod to lighten the trigger pull.
It will smooth its self out over time. As is, the pull is stiff and a little jerky.
Cheers
Groot
Last edited by a moderator:
