ICS MP5 SD

[Stuart]

Hello Gents

Looking for some advice here i have an ICS MP5 SD the hard stock version. I now want to convert it to a folding stock version.

Q. Will i have to completley replace the gear box with a front porting battery lead ?

OR can i make do with the existing gear box ? if so what do i need to do ?

Thx guys

Spit n Polish

 

[Rock-climby-Dave]

If you take the gearbox out of the gun you will see the wires leading from the back.

on the front of the gearbox is a small hole, just below the air nozzle and somewhere near the trigger assembly.

take the gearbox apart (carefully) and re-route the wires from the back to be protruding from the front.

sounds simple, But best do it on a light sheet incase any small bits jump out at you, it is also quite fiddly.

may also be a good occasion to clean everything and shim it all up nice and new.

 

[Stuart]

If you take the gearbox out of the gun you will see the wires leading from the back.on the front of the gearbox is a small hole, just below the air nozzle and somewhere near the trigger assembly.

take the gearbox apart (carefully) and re-route the wires from the back to be protruding from the front.

sounds simple, But best do it on a light sheet incase any small bits jump out at you, it is also quite fiddly.

may also be a good occasion to clean everything and shim it all up nice and new.

Thanks that sounds quiet an easy task, i did wonder if that little gap was for something, let you know how i get on.

Ta

Stuart

 

[Rock-climby-Dave]

haha, it SOUNDS easy. When I tried it on a knackered gearbox, sh*t hit the fan quite quickly