ICS L85 trigger problem

[shaneyplane]

Hi Guys i have an ICS L85 but the trigger has a problem, the safety is sticking but i dont know if i need need a full trigger system or just the switch set does anyone have any ideas? iv spoken to a shop and have been quoted £45 for what he say is a trigger, but i have looked on the internet and found a switch set from fire support for £22

Would really appreciate some help for how much it should cost or where i can get the stuff from.

Cheers guys

 

[Tristan Orr]

I have ICS L86 but it all works the same, £45 for a whole trigger unit it a wee bit OTT, but that might include them fitting it for you... So that pretty good if it does. If not I would buy the trigger unit and take it along with you to your next skirmish at your locale site and I'm sure some one will have the brains and tools to fit it for you there and then. If you brave enough you could always do it yourself.

I've heard some people not liking the safety on the SA80 but never heard of one breaking, inside all it does it lock the trigger and hides the contact.

 

[shaneyplane]

so it only needs the switch set then? i can do that myself, just needed to find out what i need, where would i get a full trigger unit from?

 

[Tristan Orr]

Well here is the ICS website.

http://www.icsbb.com/web_e/html/02_product...=17&num=428

I recommend searching the the model code and seeing what comes up.

 

[shaneyplane]

cool, looks like i can only get the switch set, wich you have linked me, im sure i can lube the safety and get that working ok,

 

[shaneyplane]

right guys iv have stripped the rifle down and the bit of the switch set that links to the trigger had come away, (i have just swapped from an M4 to this so its not me being soft honest) lol so the rifle now fires the safety does not stick, but the trigger does not come back to fire position on semi auto but does on full auto, am i correct in assuming i just need a new switch set?

 

[Tristan Orr]

yes

 

[shaneyplane]

thanks