Darbanator
Members
- Sep 16, 2019
- 53
- 0
Does anyone have a video showing how I fit a b30/31 and a pt1 stock to a cyma
-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
How to Fit Zenitco to Cyma
- Thread starter Darbanator
- Start date
Darbanator
Members
- Sep 16, 2019
- 53
- 0
- Thread starter
- #3
Speedbird_666
AF-UK patch owner
- Jul 28, 2014
- 1,719
- 1,327
Be careful - I bought a flat rear QD plate (to run my CYMA AKS-74U as a pistol) which I think was intended for an LCT.
I had to file down the hinge point (too tall) and re-profile the catch engagement lug on the plate for it to work. Wasn't too worried on a £14 stock plate, but I would be much more careful with an expensive stock.
I had to file down the hinge point (too tall) and re-profile the catch engagement lug on the plate for it to work. Wasn't too worried on a £14 stock plate, but I would be much more careful with an expensive stock.
Lozart
Supporters
- Jun 24, 2013
- 8,493
- 4,942
Darbanator
Members
- Sep 16, 2019
- 53
- 0
- Thread starter
- #6
Lozart
Supporters
- Jun 24, 2013
- 8,493
- 4,942
OK, so fitting the handguard should be pretty easy, once you remove the original one you'll just need to reverse the procedure - did you get the gas tube cover to go with it?
As far as the stock goes, you may need the stock adaptor to avoid all the fettling issues stated above: https://www.airsoftzone.co.uk/cnc-metal-pt-stock-adapter-for-lct-cyma-ak-series-combat-union.html
Similar threads
