how to adjust a&k svd cheekpiece

[lil airsofter]

i have been wondering how to adjust it properly, i know it has to all clip in but i dont know how to get it to do so.

and also the hop up if its no trouble.

 

[Rock-climby-Dave]

simple really:

on one side there is a wire clip thing, undo that and unhook the now loose thing wire from the wire hook on the other side. (that made no sense)

take it off

place it on top where you want it to live

take the dangly down wire and loop it underneath the stock, hook it onto the hook and pull the retainer/tightener (more wire) down to tighten it on.

the hop up is fidly:

At the rear of the reciever on the left hand side (the one with the bolt) there is a clip-thing

spin it so it points slightly backwards and mostly down

pull the upper reciever off, if it doesnt go easily, spin the thing back and forwards untill it does pull up

cock the rifle

holding the bolt back there is a small grub screw on the top of a blue hop up chamber

I think it is a 1mm/1.5mm allen wrench that fits it, screw it in for more hop and out for less

let go of the bolt

put the upper back on and spin the thing back to locked position

fire

it IS safe to fire it with the upper removed

 

[lil airsofter]

thanks, but front, middle or back.

 

[Rock-climby-Dave]

the clip is in the middle of the thing, I don't use it on mine as It blocks my view of the Iron sights

 

[lil airsofter]

sorry i meant the hop up.

 

[Rock-climby-Dave]

oh, middle.