G&g cm16 mod0 combat machine gearbox upgrade, Help!

[Thatladmac]

I’m looking in to upgrade my cm16, I want to put it up to 11.1 lipo from a 7.4 but I don’t think the gear box would handle it, is there any gearbox upgrades or other gearboxes that’s would fit in to? As I find the fire rate on a 7.4 is a little slow and I want to increased that along side my FPS, range and  Accuracy.  And I have also not don’t an upgrade gun yet and I would to do it to this one 

View attachment 45340

 

[Steveocee]

By the time you've spent on gearbox upgrades and mosfets you'll have spent more than it's worth so may be worth looking at a new RIF?

 

[E21A]

By the time you've spent on gearbox upgrades and mosfets you'll have spent more than it's worth so may be worth looking at a new RIF?

Click to shrink...

Not really, can get good compression parts and a basic mosfet for £50-60

 

[Thatladmac]

That’s what I was thinking but unsure which internal parts to get for it as I think I will need to upgrade my piston to a metal tooth and maybe my gears and bearings, but also thinking about purchasing the g&g wild hog 13.5 inch and then looking it to upgrading the cm16 mod0 after 

 

[E21A]

@ak2m4 is the man to speak to about parts. 

 

[ak2m4]

As you're new to upgrade work I highly recommend getting another AEG first and then looking to upgrade one or the other.  This means that when / if you do break it you'll still have something to use.  That said a set of SLD / Rocket 13:1 gears with a High Torque motor is a good place to start once you've made sure the compression parts are working as they should.  If not then look at getting a new cylinder head, nozzle and piston head. 

I'm just firing from the hip here but hopefully it gives you a little understanding of what to look for.