• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Earmore PTT

  • Thread starter Thread starter KiloGr
  • Start date Start date
K

KiloGr

Guest
Need some help guys,

Have an earmore comms system on my helmet.  Headset works fine, but the ptt button does not transmit the mic.  If i dont put the cable into the ptt all the way, it works, once it clicks in, nothing happens.

It has done this on 2 PTTs now, is it a bad headset wire?  Not the radio as it works with my other earpiece.

 
Last edited:
I've been very unimpressed in general with Earmors. Now I just keep my headset plugged into the PTT and never remove it, because that broke my last PTT when I simply removed the plug because it's very tight and loosened some of the circuitry when I pulled it out.

Once this set goes down, I'm upgrading to Peltors and a proper PTT. Earmors have been nothing but pain. Great when they work, but very prone to failure!

 
Send it back to the retailer you bought it from while you can. 
 

I had a similar problem with the mil-pro earmor headset and PTT and went through the whole trouble shooting process with the retailer, which involved replacing both the headset and PTT, and even then neither system ever worked! 
 

Earmor PTT are terrible quality (currently) so it’s worth looking at other brands. I’ve gone for Peltors which have worked fine from day 1. 
 

 
Back
Top