Delta ring help

C

Cashisback

Members
Joined
Sep 11, 2014
Messages
10
Reaction score
2
Hello,

I have a CM16 R8-l. Is there anyway of taking the delta ring off? It's the part between the hand guard and the upper receiver. I've looked at tutorials but they all decribe how to take the round one off but the certain one I have is different to everything else. Any ideas?

 
Have you tried a hammer and flat head screw driver ??

I think with those, you knock it anti clockwise to undo it

 
Yep that's the first thing I tried. They're not screws, they're just fake.

 
Cashisback said:
Yep that's the first thing I tried. They're not screws, they're just fake.
Click to expand...
Click to shrink...
OK. Looking down into the ring, there seems to be a couple of indents that might be registration points for a two pronged spanner (a bit like a tap fitting spanner if you've seen one of those). If you put a screwdriver in at an angle and hit it with a hammer does that rotate the inner black ring?

 
Right - solution found!

You need either this tool:

g10096.jpg


Or a pair of needle nosed pliers.

Have a look here for an explanation (around post #16)

http://www.airsoftsociety.com/forums/f10/g-g-cm16-r8-l-93854/index2.html

 
You must log in or register to reply here.
Back
Top