- Thread starter
- #21
Agreed. This seems to be a common misconception, that o rings expand upon greasing/oiling, when in reality all that is doing is filling the gaps.
Best "Dry" Gas for the UK?
- Thread starter Armo1000
- Start date
Haha, well this is Airsoft after all.
They can expand ofcourse, but that's with incompatible materials. Silicon o rings and silicon oil for example.
I put something on a co2 mag o ring that made it swell 3 or 4 times it's size. No idea what the ring was made of, rubber probably.
EDcase
AF-UK patch owner
- Jun 24, 2017
- 3,601
- 1,591
Yep, each to their own ?
I only have 8 years experience but I've fixed a few leaking mags which either arrived leaking from new or second hand.
Can't think of any I've had that started leaking (Except a Co2 mag which I hate)
I only have 8 years experience but I've fixed a few leaking mags which either arrived leaking from new or second hand.
Can't think of any I've had that started leaking (Except a Co2 mag which I hate)
You seem pretty convinced to me so to answer your question, you'll be wanting Propane. Its Dry and cheap ?
Last edited by a moderator:
I've an old ksc mag, 20 years old I'd say, it's leaked but a clean and lube and it's good to go again
It doesn't matter what you do so long as things work again.
Last edited by a moderator:
DanBow
AF-UK patch owner
- Aug 29, 2023
- 515
- 550
Or . . . . . if it ain't broke, don't fix it! Carry on doing what you've been doing.
Enid_Puceflange
Members
- Jun 23, 2018
- 2,331
- 2,351
Yup, everyone develops their own ideas and practices
I only recently “discovered” gbbr’s 3 yrs ago, and have evolved my own practices for running them,
I don’t mind a bit of maintenance on my gbbr RIF’s, they aren’t as demanding as some YT videos or websites make them out to be, but sure, they do take a little bit more thought than cleaning an aeg barrel and charging a battery.
Roughly once a year I will drop a tiny bit of lube into my valves before gassing them up, it may be a placebo, but I feel it helps keep the seals alive, also a little check to ensure the valves are tight works wonders
I’ll maybe give the RIF’s a quick strip, clean then re grease the bcg and nozzle seals, again, moving parts need lubed for a friction free life.
A drop of oil on the hammer and sears etc or grease, depending on what model I’m maintaining.
I’ll remove the inner barrel and clean the hop unit & rubber maybe every second use.
But I won’t use a gas with silicon in it.
I once experienced terrible accuracy and consistency when using Nuprol gas and stripped my replica down to check the hop to see what the issue was, not surprisingly it was soaking wet with silicon oil (or whatever was in the green gas mixture)
I’m of the opinion that a happy hop rubber is a bone dry one.
Ultrair is now my gas of choice as they supply silicon free propellants, I’ve never had an issue whilst running it.
Lots of different opinions in here which is good to see
I only recently “discovered” gbbr’s 3 yrs ago, and have evolved my own practices for running them,
I don’t mind a bit of maintenance on my gbbr RIF’s, they aren’t as demanding as some YT videos or websites make them out to be, but sure, they do take a little bit more thought than cleaning an aeg barrel and charging a battery.
Roughly once a year I will drop a tiny bit of lube into my valves before gassing them up, it may be a placebo, but I feel it helps keep the seals alive, also a little check to ensure the valves are tight works wonders
I’ll maybe give the RIF’s a quick strip, clean then re grease the bcg and nozzle seals, again, moving parts need lubed for a friction free life.
A drop of oil on the hammer and sears etc or grease, depending on what model I’m maintaining.
I’ll remove the inner barrel and clean the hop unit & rubber maybe every second use.
But I won’t use a gas with silicon in it.
I once experienced terrible accuracy and consistency when using Nuprol gas and stripped my replica down to check the hop to see what the issue was, not surprisingly it was soaking wet with silicon oil (or whatever was in the green gas mixture)
I’m of the opinion that a happy hop rubber is a bone dry one.
Ultrair is now my gas of choice as they supply silicon free propellants, I’ve never had an issue whilst running it.
Lots of different opinions in here which is good to see
JimFromHorsham
Members
- Mar 30, 2022
- 932
- 1,484
Propane user here , add my own lube where I want it , not where there gas router wants to spray it . I favour greases over oils as they hold their place for much longer , nothing silicone based for metal on metal .
- Thread starter
- #28
Yeah true, but now that I know, I’d rather do the maintenance myself tbh.
Exactly my thoughts. What propane and adaptor do you use for this? Want to make sure I’m doing the right thing.
