Ares amoeba am-013

Yes it does have a mosfet, thats the circuit board.  re upgrades depends what you want, more range, better ROF more accuracy? 

 
Looking for a sensitive trigger response and more accuracy. Currently firing at 333 fps so happy with that

 
I don't think the honey badger has pre-cocking as an option so upping the battery voltage for a quicker trigger response and for accuracy you'll want a tight bore and possibly a better hop rubber, im not sure what the stock ones are like? what weight BB's do you use as I saw the best increase in constancy which pretty much is accuracy in airsoft by upping my bbs from .2 to .25 and next time i get some i'm going to try .28's if i can find some.

 
Last edited by a moderator:
It already comes with a decent 6.03 barrel..

Mosfet is integrated in the trigger board and it's LiPo ready.

On mine I replaced the bushings and got a new tappet plate since I snapped it in half while doing regular maintenance (yes I'm an idiot)

I use it with a 11.1v 1300mAh 25c battery, grants me a nice trigger response and a nice RoF as well (I suggest replacing the bushings straight away if you plan on plugging 11.1s)

you can mod the sector gear to make it pre cock the gun, you just have to move the magnet :P

as far as hop rubbers, I found that g&g green ones don't really fit, I went prommy purple and it's awesome.. Be aware that the nub is integrated in the arm and flat/r hopping it is kind of a pain in the neck to do..

 
Last edited by a moderator:
You must log in or register to reply here.
Back
Top