Airsoft utr 45 aeg issue

Osman

Members
Joined
Apr 1, 2025
Messages
2
Reaction score
0
IMG_5030.MOV

 


Hello guys can anyone help me about this issue.

it shoots sometimes multiple bbs on semi auto and on full auto it shoots like 5 bbs and then it stops and beeps 2 times as in the video.

I have bought it since 4 month ago and it is not so old.

i have bought a good battery and charger but it’s the same.

 
please check

?? UTR45 has a Falcon EFCs, check the program guide, your problem may be solved.

“The fully automatic position can be reprogrammed to provide bursts of 1-5 rounds, and the semi-automatic position can be swapped out for a function known as "binary trigger". This function fires a shot when the trigger is pulled, and another when it is released, effectively doubling your semi-auto fire rate!”

 
Thank you very much for your help. But  didn’t solve the problem. It keeps firing burst on full auto and then it stops and beeps two times. And I have resetting it to the normal setting but it keeps firing burst on full auto and on semi auto sometimes shoots 2 bbs or 3. Since I purchased the gun I’ve been using it only on semi auto and on full auto but since one week it shoots automatically burst on full auto and it stops and beeps two times.

I have contact the double eagle and they sent me this email.

View attachment 147013

 
Last edited by a moderator:
Thank you very much for your help. But didn’t solve the problem. It keeps firing burst on full auto and then it stops and beeps two times. And I have resetting it to the normal setting but it keeps firing burst on full auto and on semi auto sometimes shoots 2 bbs or 3. Since I purchased the gun I’ve been using it only on semi auto and on full auto but since one week it shoots automatically burst on full auto and it stops and beeps two times.

I have contact the double eagle and they sent me this email.

View attachment 147013
Hi, I have the same problem but cannot see the email you received. Have you managed to solve the issue? Thanks.
 
That may be a low battery warning when it does the 2 beeps. I had a falcon that did something similar where it beeped after shooting. Even with a good battery it still beeped so my guess was faulty mosfet. The fix for me was to replace the mosfet, patrolbase sell them, or add a perun or other more reliable mosfet.
 
Hi, I have the same problem but cannot see the email you received. Have you managed to solve the issue? Thanks.
Unfortunately nobody can see it. Last year there was a huge update to the forum and this caused all photos to be lost. Also the op hasn't been back since 20th June so I doubt you'll get a response
 
That may be a low battery warning when it does the 2 beeps. I had a falcon that did something similar where it beeped after shooting. Even with a good battery it still beeped so my guess was faulty mosfet. The fix for me was to replace the mosfet, patrolbase sell them, or add a perun or other more reliable mosfet.
thanks, I'll try with another battery to see if it's the same. when you say replacing the mosfet do you mean the mosfet transistor (an electronic component on the board) or the whole electronics?
 
Unfortunately nobody can see it. Last year there was a huge update to the forum and this caused all photos to be lost. Also the op hasn't been back since 20th June so I doubt you'll get a response
seems it was a suboptimal forum update. hopefully op gets an email notification and shows up, it would be good to know what the manufacturer's response was.
 
Hi, I have the same problem but cannot see the email you received. Have you managed to solve the issue? Thanks.
The Falcon Fire system does this pretty regularly - my UTR-45 has done the same and it seems to be a common fault with them unfortunately

Pete has some Perun Lightning V2s in stock which is a worthwhile replacement as it's better than a Hybrid V2 but is also cheaper at around £59 but with the UTR's gearbox you'll need to dremel away some of the material to get it to sit right, it's what I did with my project [I've got a normal hybrid V2 as I started building mine a while ago] that I still need to get around to finishing, shit out of luck unfortunately bud
 
seems it was a suboptimal forum update.
Not really, the whole software was out of date and needed to be migrated to new software, you can read more about it here
If you think you can do better feel free to set up your own forum
 
thanks, I'll try with another battery to see if it's the same. when you say replacing the mosfet do you mean the mosfet transistor (an electronic component on the board) or the whole electronics?
I was thinking bin the whole mosfet and replace it with a new one. If you can locate and replace the failing component of the mosfet if you know how to do that, that'd work too. Quite a faff though. The falcon mosfet is £35 + p&p. If it were me if be getting a perun as said earlier for £20 extra and getting a far more reliable mosfet with excellent after sales support of you have problems. Keep an eye on ak2m4.co.uk to see when Pete gets a restock of perun lightnings.
 
Back
Top