Cheeky vimto
Members
- Sep 6, 2013
- 797
- 217
Hi guys
I've been out the airsoft loop now for about a year and half. I struggle to get any mates to join me and I've done enough skirmishes on my own in the past, It's just not as fun. What I'm asking is what sort of prices can I expect on my gear, I'll try be as thorough as possible.
Warrior DCS Plate Carrier & Helmet with goggles
View attachment 22909View attachment 22910
This vest has a few pouches on it. It has a tan camel back,dump pouch, 2x pistol clip, 1x 5.52 mag holder (6 slots), 1x medic pouch, 1x radio pouch, and a carabiner.
Tan Shemagh scarf.
There is a AF-UK patch on the vest, and a name tag patch & a "tactical beard" patch on the helmet.
I modified the goggles on the helmet. I used to play alot of indoor and found my goggles fogger up so I mounted 2 mini fans on the goggles. Worked a treat!
Modified G&G CM16 raider (pneumatic recoil turned off) & gun bag
View attachment 22912 View attachment 22911View attachment 22920View attachment 22913
I heavily modified this gun. Originally had a pneumatic recoil but changed the cylinder so doesn't work. Here's what I changed inside;
This still has the original spring and if i remember correctly it was shooting about 330-340fps and about 30bps. It has a light with a pressure pad on one side and a rail guard on the other.
There is 11 mid caps, 2 high caps, 1 large loader and 2 small ones. Also pictures is a small multicam bag i used to carry spare BBs on the field.
The gun bag is tan and can hold both rifle and pistol with 2 spare pockets for whatever else you take.
Batteries & charger
View attachment 22915
1600V NI-MH with charger and a 7.4V 25c 1300mAh Lipo with charger.
Tokyo Marui Glock17 with holster
View attachment 22916
Unmodified TM G17 with 3 clips. There is half of a large gas and a tiny bit left in the smaller can.
The holster is made by Fobus. It's made for a real G17 and TM make their guns slightly bigger. To make it fit i had to slightly modify it but it works flawlessly now.
Misc items
View attachment 22917View attachment 22918View attachment 22919
There is alot of items here;
I'm not sure If I'm posting this in the right place, I just needed some advice before i commit to selling. Thanks!
I've been out the airsoft loop now for about a year and half. I struggle to get any mates to join me and I've done enough skirmishes on my own in the past, It's just not as fun. What I'm asking is what sort of prices can I expect on my gear, I'll try be as thorough as possible.
Warrior DCS Plate Carrier & Helmet with goggles
View attachment 22909View attachment 22910
This vest has a few pouches on it. It has a tan camel back,dump pouch, 2x pistol clip, 1x 5.52 mag holder (6 slots), 1x medic pouch, 1x radio pouch, and a carabiner.
Tan Shemagh scarf.
There is a AF-UK patch on the vest, and a name tag patch & a "tactical beard" patch on the helmet.
I modified the goggles on the helmet. I used to play alot of indoor and found my goggles fogger up so I mounted 2 mini fans on the goggles. Worked a treat!
Modified G&G CM16 raider (pneumatic recoil turned off) & gun bag
View attachment 22912 View attachment 22911View attachment 22920View attachment 22913
I heavily modified this gun. Originally had a pneumatic recoil but changed the cylinder so doesn't work. Here's what I changed inside;
- SHS cylinder
- SHS piston
- SHS piston head
- 70D Sorbo for piston head
- SHS spring guide
- SHS high speed gears (I believe they were 13:1)
- SHS 8mm bearing
- SHS shims
- Lonex A1+ high speed motor
- Hamsterfet mosfet
- Dean connectors
This still has the original spring and if i remember correctly it was shooting about 330-340fps and about 30bps. It has a light with a pressure pad on one side and a rail guard on the other.
There is 11 mid caps, 2 high caps, 1 large loader and 2 small ones. Also pictures is a small multicam bag i used to carry spare BBs on the field.
The gun bag is tan and can hold both rifle and pistol with 2 spare pockets for whatever else you take.
Batteries & charger
View attachment 22915
1600V NI-MH with charger and a 7.4V 25c 1300mAh Lipo with charger.
Tokyo Marui Glock17 with holster
View attachment 22916
Unmodified TM G17 with 3 clips. There is half of a large gas and a tiny bit left in the smaller can.
The holster is made by Fobus. It's made for a real G17 and TM make their guns slightly bigger. To make it fit i had to slightly modify it but it works flawlessly now.
Misc items
View attachment 22917View attachment 22918View attachment 22919
There is alot of items here;
- Face masks
- Glasses & goggles
- Never used gloves
- 3x spare torches
- knee pads
I'm not sure If I'm posting this in the right place, I just needed some advice before i commit to selling. Thanks!
