Search results for query: *

If you tried your friends bolt and it works fine, then maybe buy a new bolt? ? Try following a YouTube guide and disassembling the bolt, then you can check to see if anything is out of place. What exactly is going wrong?

I’ve been testing the G&P 46rd PMAGs for a few days now and thought I’d give a quick write up on here. I got a chance to use them all day in CQB so I feel confident in their capabilities in the short term.   First impression: “boy this thing sure is long”. The magazine locks positively...

SSPKali pretty much answered this already. I can say that if you want to use a tracer unit, this kind of build can be really effective as you can tuck the tracer into the handguard and avoid that extra 3-4 inches of length. I’ve done that with my Angrygun mcmr and acetech blaster. 

Yeah I literally knew this, but some other guys were claiming that silicon oil in their trigger box worked really well so I went with that, but luckily in the end it was just 15 minutes of work to clean it out, apply lt2 grease and problem solved! Definitely keeping silicon oil WELL away from my...

I started having this issue as soon as I put a single drop of silicon oil into my g&p/RiW trigger box lol. Literally a single drop of silicon oil onto the semi/full auto sear and it completely stopped working.    My stock trigger box had the same issue. As soon as I started using silicon...

Red gas runs at higher pressure than green/nuprol 2.0, so I would be wary of accelerated wear on weak parts like the nozzle spring and buffer. Aside from those though, it’s perfectly safe to use red gas depending on the ambient temperature.  I used Nuprol 3.0 between 4 and 12°C with great...

If it's compatible with already existing aftermarket AK parts, GHK have a serious contender to deal with. But knowing TM, it's not going to be like that at all ? 

Like I said, there is a use case here where it is too cold for any kind of propane based gas and you really want to use your MWS, HPA is the only option ? It’ll be clunky to operate but you’ll get an awesome and consistent fps even in the coldest environments.  

I mean don't get me wrong, I totally agree with you on the negatives here. Apparently Gunsmodify will make CO2 (Devil Hunter maybe?) version of their PMAGs, which will be perfect for when there's temperatures low enough that green gas/propane completely fails. Tapping your GBBR mags should only...

HPA tapping your MWS mags when it gets really cold shouldn’t be such heresy lol. I’ve run my MWS at 3-4°C on Coleman propane with fairly good results, but I was semi only and purposely firing more sparingly that usual. I tried running it at -1°C with black gas and it was not useable at all...

I'd recommend messaging RuninWorkshop on Facebook. They usually reply extremely quickly and they know this trigger box inside and out. It's likely that you haven't adjusted the grub screws properly yet. I think someone once told me that straight out of the factory the trigger boxes are shipped...

Interestingly, the dead trigger issue started happening after I took my trigger box apart, cleaned out all the gun and old grease, then reassembled with a little silicon oil on the contact areas around the different sears. I thought I had over-lubed it, so I took it apart again and cleared out...

My long awaited (I say long, it literally arrived in 3 business days- posted Wednesday, arrived Monday) new trigger box. My stock trigger developed issues and I was always unhappy with how it felt.  First impressions were wow, the construction is SO much cleaner than the stock trigger box. I...

Hmmm that's really strange. Definitely never heard of it happening with a stock bolt. I can't imagine a different bucking/nub or buffer would have any effect here. You could try putting the stock buffer in and seeing if works? 

I had this problem once however it was the opposite, hop was being reduced with each shot. I had this problem when using the first generation AngryGun high speed bolt set (uses their nozzle and stuff). I ended up returning it after being in contact directly with Angrygun, who were unable to...

When I had my TM MP7, I used an Omega Nub with Maple Leaf bucking. However, I had to install a spacer between the hop arm and the nub in order to get any pressure on the bucking. I just cut out a small rectangle from an eraser and it worked perfectly. I imagine you could do the same with...

Angrygun 10” mcmr is finally on! I think I prefer this look over the 8” mcmr, although I did really like the feel of the 8” handguard... At least they both use the same barrel nut so I can swap between easily, and I’m using outer barrel extensions to accommodate  the extra length which makes it...

I've personally had best success with Tippmann tracers. By success I mean they light up the brightest with my Lighter S. I used ASG Blaster tracers when I didn't have Tippmann BBs on hand and the difference in brightness is very noticable. I've never had a jam or bb-explosion with Tippmann bbs...

Damn that’s specific AF, I wonder if I’ll even be able to find something like that lol... mine is brand new as well, literally took it out of the sealed box, popped some bbs in and inserted my PTS epm, and immediately bbs were falling out once the mag was full. It seems like it didn’t ship with...