Search results for query: *

I have recently fitted some 13:1 Solink helical gears to my M733 build. Everything else stayed the same - warhead motor (mid speed one?) 7.4v via a Perun AB++ Totally flawless with the SHS 13:1 gears but a bit noisy, hence the helicals. Now it has started double tapping every 20-40 shots. Tried...

Hi all, Now GBBR weather is here I am fettling my franken TM&C M733. I was running 18:1 gears (2 from pick up / 2 from release) with Warhead 35k and 7.4v or 9.9v. Was snappy but a bit noisy. M110 spring giving 1.0J on 0.28g Noise was probably due to the pad on the cylinder head being...

Having played at Warzone last weekend I realised my elderly eyes need some help on PIDing people at a distance. I have a Vortex red dot on the MWS and the obvious choice was the Vortex mini flip to side 3x …except it is £300! So there are others available for £50-100 which is probably the cost...

Hi, I am trying to sort a leaking output valve on a friends Webley CO2 pistol (might be a Well?) and despite greasing the orings and threads and doing the valve up tight it is still leaking when a bulb is fitted. Are o-rings for CO2 different to green gas use? Possibly due to higher pressure...

After a pair of safety rated shooting glasses for airsoft use. I tried a pair of Bloc Lynx and found that they sat very high on my nose but more worryingly there was a BIG gap at the side / side of the cheek. Does anyone with a narrow face have any recommendations? Preferably available with...

Excited to be able to make this one as it has been too long since the last event (Op ACRE from Stirling Airsoft....also at Glos Prison) and I love game play with a bit more to it than just 30-40mins of pew-pew and then faffing in the safe zone for almost as long. Still weighing up the primary -...

Been thinking about this for a while and would open it up to the hive mind to see if I am on to something or talking cross-eyed badger spit. There are plenty of videos out there where someone fills a mag with gas, but no BBs, and proceed to fire until the bolt or slide won’t lock back. They...

Thinking about a Perun AB++ for the M4 which is front wired and so the two power cables are on spade connectors so when I take the upper receiver off I can disconnect them and feed them through the gap at the bottom of the barrel below where the hop unit sits. This leaves the fuse and deans...

Just got the TM M733 and on testing noticed that there is a double clunk - first is the piston head hitting the end of the cylinder but then there is another - possibly the piston bouncing? Loose spring guide? Chopped spring. FPS is +/- 3fps and shooting 295fps on 0.20g BB so it is working...

Morning all, I have a new toy on its way in the form of a TM M733 “Colt Commando” Totally stock at the moment. I plan on checking how it runs as standard - accuracy, consistency and trigger response. No sense just replacing stuff for the sake of it! It will be run it on 7.4v as a CQBish...

Hi all, I have a Cyma MP5 that I really like....except for the angle of the pistol grip! My M4s have all had quite vertical / chunky pistol grips (Magpie or Ergo) as I find this more comfortable on my wrists. On the MP5 there is no option to change out the pistol grip and with the fixed stock...

My old and rather battered AlphaTex BFG let me down 4 times at the weekend. It was denting the primers but not enough to set them off. The fifth time I tried it it finally worked. Over the last couple of years and 80+ primers it has probably not gone off twice. Has anyone taken one apart? Is...

Morning all, I have decided to finally tackle the huge box of gear and parts I have kicking about and thought a bring n’ buy sale would be a good way to shift it without the bore of taking photos, getting paid and posting it all. Does anyone know of any airsoft bring and buy sales in the...

Just turned up to the site (having booked a ticket last month) and it is all locked up and no signs of life. I had no notification that the day was cancelled, any one know what is going on?

I am planning to fit a Gate MERF mosfet to my Cyma MP-5 High Speed. The gun will be rear wired with the battery and mosfet in the fixed stock. Being a v2 gear box there isn't room for two 16AWG Silicone wires (motor) and 2 thin signal wired in the gearbox shell, especially around the motor entry...

Ok, I am a bit flummoxed. Having time on my hands I thought I would put some high speed gears and high torque motor into my AKS-74U and short stroke the piston to make it a snappy CQB gun. Before I started tinkering all I had done to it was shim, replace the nasty blue air nozzle and hard wire...

Make/brand: G&P M4 MOE Any accessories included: Gate Titan basic w/ cable and programming card. Upgraded motor, barrel, gears (and shims) R-hopped in Prowin hop unit. Carbon fibre over-barrel "silencer" and gas block with flip up sight (original A sight included) Works great on 0.30g BBs...

Soooo I am loving my Visionking 1.25-5x26 scope but the magnification ring isn't great to grip. There are throw levers available to clamp round this but I noticed this recessed hex bolt and wondered if it could be replaced with a threaded bar to act as a lever? The problem is that I don't know...

I am after a cordura molle pouch for my AlphaTex grenade. Not interested in a kydex one so please don't suggest it. The grenade pouch I have is sized for a Mil Smoke and it is way too big. Fits the SWAT timed grenade fine. The Alpha Tex Hex grenade is 44mm diameter and 125mm tall...would it...

I am loving my WE G19 with the Maple Leaf hop unit and crazy jet barrel. The trigger safety has got a bit floppy so I was looking at replacing that with a Guarder unit...is there anything else I should look at replacing while I have it in pieces?! Looking for consistency and efficiency...not...