Search results

Hi all, got a second hand leaky Glock mag for my aap01 but looks like someone has changed out the o ring to the wrong size, hense why it's leaking. What size should be on here? Also shouldn't it be square? As I can't see a circular oring sealing the corners well. Any help is appreciated

Hi all currently tinkering with my classic army scarab. The gun fires perfectly for around 5 shots sometimes more, FPS is 0.96/0.99j but every now and then I get a low baller at around 0.35j. any ideas what could cause this? Gun has V2 GB, 13:1 gears, high torque motor, Perun basic MOSFET ...

Hi all, currently trying to fix this extended aap01 mag I bought, knew it was leaking but was only £5. The gas is leaking from the corners of the square plate , from the pics you can see the current o ring isn't sitting on the corners enough to create a seal. Does anybody have any idea what size...

Hi again all, just a quick one this time. Where should a BB sit in hop bucking once nozzle has been fully released forward? I.e should it still be gripped by the lips or should it be pushed through just behind the mound?

Hi all, have an m4 I'm having issues with the hop. I have tried everything from standard prommy purple, maple leaf and s hop, all do the same.. I have a consistent 330/331fps on 0.2g but every shot is different, the bbs fly perfectly straight but the vertical action of the bbs changes every...

Hi all, I'm sure this topics been discussed previously somewhere but what range should you expect from your aegs at 330-350fps on 0.2g... I ask because I read somewhere that someone's aeg at 340fps was hitting targets reliably at 200ft( can't remember where). My classic army scarab, which has a...

Hi again all, strange issue with an ak build I'm working on. Semi is working fine but when I try and put it in full auto it's as if the COL won't let the trigger past.  It's as if the col lever is rubbing the bottom of the trigger side

Hi all, have a quick question. I'm used to playing dmr roles and standard m4 aegs. I've recently switched to a dye mask and getting behind the scope is a nightmare. I was looking for a lightweight pew pew, the ssg1 seems great due to its light and position of stock allows masks with ease. My...

Hi all currently looking for a v3 gearbox and motor cage, I've looked all over and only ones I can find are on fleabay and are from China. Does anyone know where I can pick one up? Doesn't have to be complete , just shell and motor cage needed. 

Hi all, have an upgraded classic army scarab. It has 13:1 gears, AOE corrected, shimmed very nicely (bevel to pinion), new airnozzle and shs high speed motor, Gun cycles lovely, problem is if I use an 11.1v (has built in mosfet /ETS) the battery gets warm very quickly, be it full auto or semi...

Hello everyone it's only me again. Having issues with my scarab and feeding on 3rnd burst/full auto. In semi the gun feeds perfectly even with rapid trigger pulls but in 3rnd burst it's almost as if bbs are smashing against each other in the barrel and coming out broken. Is this tappet, nozzle...

Hi again, having more issues with the classic army scarab. I'm looking for a new hop as the one that comes as stock seems to be allowing double feeds at random times. Problem is although it's an m4 hop, the to part is alot lower. Alternatively could I cut the top piece out of the outer barrel to...

Hi just received my classic army scarab abr, having a slight problem with it. The motor (which Is the high torque version) is becoming very hot within 15 shots (be it on auto or semi). Is this going to be down to poor factory shimming/motor alignment?

Hi all, my specna v3 gearbox is causing headaches. Basically when I shim I shim bevel to pinion method, but when I tried I can't even get a 0.5mm shim under the bevel as when motor is installed it is all ready biting on the pinion. I've tried different bushings( low profile) and still the same...

Hi again having issues with my sr25. Basically it's locked to semi and I'd I do a slow trigger pull it will double fire, if I'm quick with the trigger (mechanical) it shoots fine. I feel that the trigger shuttle is engaging the contacts to soon before the cut off lever kicks it off, causing the...

Hi all, I'm new to gas guns and needed some help in lowering my pistol (well dmr'd aap-01) fps. It currently shoots between 470-500fps, I ideally need. It between 430-450 on 0.2g bbs, does any one have any advice 

Hi all recently acquired an aap-01 which has been dmr'd (so to speak, locked to semi shooting 410fps on 0.2g) problem is, is where the front rail system attaches to the outer barrel( locks on with screws and bites down on outer barrel) there is movement with little force as the outer barrel is...

Hi all, just bought an aap-01 and it came with a semi only selector plate installed. Does anyone know where you can buy just the standard switch which allows full auto

Hi again all, currently  having a frustrating time with my hop. Ive tried everything and i either get not enough hop or with minimal turn, over hop. Ive tried an r hop and maple leaf, still smame results. Ive also tried 2 different hops. The standard black cyma hop(dial type) and modify...

Hi again all, almost finished on. My cyma sr25, my question is can a standard v2 trigger mosfet i.e perun, fit in a v2.5. Gb?