Search results

AEGs have a set volume of air in the cylinder they will force down the barrel.   Gas guns (and I think HPA too. I don’t own one so no first hand experience) will keep pushing out gas to fill the volume behind the BB until it leaves the barrel and the pressure drops allowing the rocket valve to...

Videos are dead on that post ☹️ Got the Steel and Alu bolts set up with G&P stops and regular plastic valves. ~260fps and ~240fps respectively on 0.32g / ASG gas / 25DegC shed ? Taking less than half a mm off the back of a plastic valve gives a 20-30fps gain. Rub on some wet&dry on a...

Built up a new nozzle tonight to replace the TM one with the broken screw and G&P NPAS that was adjusting its self (and trying to get me banned from the local site Luckily discovered testing at home!) Set up was the same for all gasses. Minimal Joule creep with 0.28 > 0.32g BBs (lighter...

Is it a polymer body? It might be the older type with “rear ears” that the rear body pin goes through. These you only need to remove the rear pin and carefully pivot the upper around the front pin. Search out the TM M733 AEG manual for instructions and pictures. 

Yep, exactly that! I am going to fit new feedlips to #5 and test again. Only thing I think it can be!

Has anyone had worn feed lips on a mag cause bbs to roll out the barrel when they are chambered? Only seems to be one mag doing it! Manually charging the bolt is fine, but after it shoots and cycles the next BB just rolls out the barrel. Hop is on (4-5clicks) and hop rubber is pretty new...

I have tried Nuprol “white” gas (their low powered one, probably close to 144a) and only found a ~20fps drop (305 > 285ish)  Tempted to get some bottles of the 6kg / 8kg / 12kg gas - can’t remember the brand but having named steps might make it easier to guesstimate!

Geoffs 0.32g gave the best groupings in my testing with the MWS but since they have been so scarce I gave Warhead 0.32g a try - similar grouping (thumbnail sized at 10m) so I grabbed a kilo of them and I have been happy with them. Zero splits or misfeeds. The 0.28g are the favourite food for...

I have run the stock TM barrel and a CrazyJet one. Both were 250mm but the CrazyJet pushed the fps up by 15fps give or take. Grouping at 10m clamped was slightly tighter with the CrazyJet but there wasn’t much in it.    Accuracy is fine for most ranges you might encounter and torso shots out...

I have had the chance to try out the Angry Gun 110% and 130% buffer springs for the MWS. I am running a stock TM bolt with Hao steel bolt end and AG alu buffer for reference. The 110% worked the same as a stock / the G&P it replaced. Will keep this one for winter or use with the DP...

Also switch out the Cyma nozzle as they are usually leaky as hell ? AK2M4 should have a suitable o-ring nozzle (measure up the length with calipers to be sure!) and replace while the gearbox is open.

I have a BFG holder from them and it is a nice bit of kit and order was sorted and posted with no problems. Not tried their mag pouches so can’t speak to them specifically.

10mm ID X 1mm thick for big one on the brass part. 4mm ID x 1.5mm thick for the front one. You’re welcome ? 

Hi, I am trying to sort a leaking output valve on a friends Webley CO2 pistol (might be a Well?) and despite greasing the orings and threads and doing the valve up tight it is still leaking when a bulb is fitted. Are o-rings for CO2 different to green gas use? Possibly due to higher pressure...

While FREC guidelines are just compressions, but a BVM or O2 (15L/m) are helpful ?? While the BeeGees “Stayin’ alive” is the right rhythm so is Queen’s “Another one bites the dust” - just sing it in your head ?

So I broke out the spray paint and started blasting… TM M733 also painted but didn’t take a photo of that one.

Nah, wife likes it too as I was a bike mechanic when we first met so it reminds her of when I was slim and handsome ?

I was told when training to FREC3 that as long as you didn’t go beyond your training (start trying open heart surgery in the safe zone) you would be safe. Basic life saving training is great as is noting down time of incident, what the incident was (fell from X meters / hit by car approx 20mph...

Yes, a small one in an LBX pouch. I have even sewn the top bellows part closed on the pouch to stop it flopping about - this would all fit in a combat trouser pocket easy. Plasters Compeed Paracetamol x4 Nurofen x4 Asprin x1 Immodium x4 Saline wash pods x2 4” burn dressing Eye dressing...