Search results for query: *

T8 window mag has arrived, waiting on some steel take down pins, steel dust cover, and the BJ TAC 1.5 heat treated Japanese buffer spring to arrive.    I think the heat gun needs to come out on the MK18 again after 3 years and what must be 50-60,000 rounds if not way more the modify tan hop...

I think my MWS MK18 build is finally complete. internals sixG brass nub modify tan bucking prometheus 370mm 6.03 inner barrel PTS mec buffer with spacers DynamicPrecision nozzle spring set T8 gas routers (magazines) external  Magpul pistol grip Magpul foregrip Magpul CTR stock Clone...

Hi all, I’m after some advice/opinions, I’ve had my MK18 MWS since it launched, I’ve skirmished it stock for many games, always maintained it after each game day, fired many a thousand rounds through it, it’s been thrown, fell on, slammed on the floor, slammed against trees as I’ve taken...

Well guys finally got around to installing the SixG brass nub and modify tan bucking inside my MWS MK18, the barrel nut is so easy to remove so long as you have a heat gun and the correct tools. skirmished it with the upgrades for first time today, prior I had been running it pretty much stock...

Yes mate it is, PatrolBase excellent service

GBB gen 2 3 round burst on a gas blow back is insane, and the build quality of this gun is incredible. I actually prefer it to my MWS, and everyone that I have shown it to, prefers it over the MWS. Yes there is a little stock wobble but this can be remedied by pushing the release lever in the...

I own this gun, Personally I find it runs absolutely fine on green gas, especially on 3 round burst, wouldn’t want to use full auto in game anyway because your game would be over very quickly ? I find this gun has better gas efficiency than the MWS.

Whilst everyone out here buying MWS’s, I picked up something a little different…

Hey guys, hope your all well, a quick question to all those who have bought the MK18 gbbr. Are you guys finding the dreaded barrel nut easy using the correct tool? Or is it still a struggle? I have been holding off on this for a while but think it’s about time I finally made the upgrades, I...

@AlphaBear I already have a SixG nub waiting to go in, I will look into getting the buffer as well, thanks!  I have an Eagle6 nozzle spring, It’s the  150% one, is that the stronger one you speak of? I was keeping it until the original failed, but I may just swap it out whilst I do the nub. The...

Isn’t the red can of abbey equivalent of green gas?

I have been to a skirmish today and learnt something valuable about the MWS…….It much prefers Abbey ultra predator over Nuprol 2.0. Since last October I have run my MWS on nuprol 2.0 (green can) and I was instantly impressed by the range and accuracy but not the full auto, almost to the point...

exactly this! I have taken my MK18 to 1 game and the left side has very light scratches, almost superficial, some of them rubbed off and some remained but they are very faint. It’s from the gun resting and rubbing against my mags, metal on metal as alphabear says. The mags on the other hand have...

Awesome advice! cheers dude

Twang, perfectly put, it’s exactly that a twang, so I’m just being paranoid then. My mk18 always struggles on green gas on full auto at around 10 degrees Celsius, got a game Sunday and temp looks to be around 20 so hopefully she performs well.

Hi guys, hope your all well, just wanted to run something past a few of you experts, on Saturday I filled 6 mags and took the MK18 out into the garden basically just to zero my holographic sights and have a bit of fun. First 3 mags were fine but as the other 3 sat on the table they were getting...

@Kerberos On Friday I quickly made a tool at work for this but the bars external diameter was too big so I need to make a new one, I noticed my gas block was glued to the inner barrel, I was surprised by this as I thought it would just slide out after removing the 2 grub screws, that being said...

yes it’s counterclockwise to loosen, where did you get the tool from? I have the heat gun, but I want a tool that fits all 4 teeth so that the pressure is applied evenly, at the moment I’m leaning towards making one myself with a bit of grinding and welding.

Magpul CTR stock mil-spec Magpul MOE-K2+ pistol grip

Unfortunately I bought the MK18 before we knew about the dreaded barrel nut, however I’m not rushing into upgrading, I have a SixG brass nub from Dave which has sat in my draw since November, I’m kind of learning from other people mistakes before I attempt it, this one largely comes down...