• 2FA temporarily disabled, emails not working

    2FA has been temporarily disabled while we figure out why emails are not being received by large numbers of users. Emails are not sending site-wide. Please continue to use AF-UK as normal but note that you may be asked to log back in once this is re-enabled.
T

THE FNG

Members 35 From Stoke
Joined
Last seen
Messages
452
Feedback score
+0 /0 /-0
Reaction score
107
Points
43

Profile posts Latest activity Postings About Post areas

  • T
    TM cqbr owners: im aftermarket rails that people can recommend that dont require major mods? Ideally after a mk18 but will view all rails

    T
    Anyone interested in a tm fn57 with a light striking issue before I put up a classified post? Your choice of tan or black slide

    Druid799
    Druid799
    How do bud , how does the fault manifest it’s self ? 

    T
    THE FNG
    It cycles ok with no issues but teh slide is slow and it sounds very weak as opposed the crisp and loud sound it usually makes.

    It does fire rounds but sometimes fails to send a round down range.

    I did a temporary fix by stretching the hammer spring slightly and this worked for a little while.

    T
    Anyone know of any airsoft techs around stoke/staffordshire?

    Edit: refuse to use defcon; shocking customer service

    View previous comments…
    strykerles
    strykerles
    out of curiosity, what do you need doing?

    T
    THE FNG
    Got a g&p sr15 that's dead. I think it needs a new switch/trigger contacts as it was firing intermittently on trigger pulls before it died. Also needs some battery Dean's connectors adding.

    S
    Stratton Oakmont
    Check the motor connectors, they sometimes come off. Then pull the motor out and connect the spade fittings again and pull the trigger, if you have a spare motor do the same thing as a quick test of  the motor and trigger shuttle. May save pulling the gearbox if it’s a dead motor, 

    T
    Anyone know of any good biodegradable ammo to try?

    snuff
    snuff
    I can only tell you Blasters were terrible,constantly jamming in guns.Put us right off Bio's ,I watch replies with interest..

    Adolf Hamster
    Adolf Hamster
    gonna give geoff's bios a go next shoot, will report back.

    T
    TM SCAR L users: anyone put the mag adaptor in? Any mods required? 

    View previous comments…
    T
    THE FNG
    Yea that's the one

    H
    heroshark
    Most users just use recoil compatible mags as you lose the bolt lock feature. I've also heard the have a tendency to drop out. And if you don't realize and slap a standard mag in too far it can break the bolt lock piece. Personally I wouldn't bother. 

    AlphaBear
    AlphaBear
    People sell the recoil mags on here all the time so just wait to pick them up at a good price...

    T
    Recommendations for 'no-fogging' goggles for a very sweaty and overweight rehab project?

    View previous comments…
    R
    RobHedley
    As @Steveocee states, getting airflow through is the key. Not wearing head gear is not an option for me as I have a shaved head so I have a pair of ESS Turbo Fan Goggles and they are amazing. Yes they are expensive but after that first game where you can see clearly for the entire time, you realise they are worth every penny!

    Rogerborg
    Rogerborg
    Counterpoint to the headgear argument, I find that a 1980s style sweatband around my brow actually helps to stop perspiration running down and steaming off.

    Fan goggles though, just do it.  FMAs work fine and won't break the bank.

    H
    Hutchy85
    Get an Exfog, then you can wear whatever eye-pro you want with them.

    Was a game changer for me.

    T
    Any tm glock techs out there anywhere? 

    T
    THE FNG
    It's my tm g17. Can't get the bugger work!

    I've got it venting gas when trigger pulled.

    T
    Any interest in an ICS L86 before I post a classified? Testing the water....

    T
    THE FNG
    Sorry for late reply; I suppose an M4 platform and anything that used m4 mags.

    Not interested in snipers or support.

    T
    Anyone selling a cheap tm g18c?

    D
    Duff
    Just sold a TM G17 to my buddy, but I have some WE extended mags going if you need any once you find an 18c!?

    T
    THE FNG
    will bear you in mind!

    T
    Is it worth adding a maple leaf bucking/omeganub to TM NGRS?
    Got 2 scars that I've used for 4 years, no upgrades. Wasnt wether to squeeze the rest of the original rubbers life out or to put in a new one now

    T
    Hi all. I'm looking for the l96 suppressors that go over the outerbarrel and go backwards towards the scope...if that makes sense!

    proffrink
    proffrink
    Airsoft Pro do one. It's called a 'VIPER Sound Tech'.

    T
    THE FNG
    That's the one! Thanks

    T
    Maple leaf hop and nub - sorted hours of troubleshooting my l86 airseal issue! Brilliant and recommend to anyone with air seal issues! Also boosted fps by 5!

    T
    For those that have added prommy barrels to tm recoils; what fps changes have you had and what length have you installed? Ta :)

    Esoterick
    Esoterick
    I use 275mm which is just the recommended HK416 barrel on Eagle6. I think FPS was marginal but I tend to ignore the chrono readings

    Spatch
    Spatch
    Concur, fps increase I found to be marginal, creating a better airseal with replacement hop rubber and various tricks will raise it a bit, tried various barrel and rubber combos in recoils recently

    T
    UKARA question: Does a firearm licence/shotgun certificate enable you to buy a RIF? Sorry if its a daft one!

    TacMaster
    TacMaster
    Nope

    T
    THE FNG
    Didin't think so, ta :)

    Tad
    Tad
    No it doesn't, you need to obtain the license from your local constabulary or group I believe.

  • Loading…
  • Loading…
  • Loading…
  • Loading…
Back
Top