Recent content by tomola

There not screws mate there spot welds 

Nope no screws mate. Can't for life of me work it out 

hi all just getting back into airsoft after 3 years and ditching all my gear. A friend has kindly donated an old G&P he had that needs a bit of work on the gearbox (new piston and battery connector) to make into a decent m4 to suit my play style. I've taken a few uppers apart but never seen...

As per the title what mags would be best for holding mp7 mags need to be molle off my vest btw

The annoying thing about that solution is nowhere ever has pmags in stock

So I've just got my new g and p with a magpul lower receiver and the pmag it came with feeds perfectly but my socom gear troy battle mags will only feed 1 or 2 before it just dry fires, just to confuse me even more though my g and g high cap feeds perfectly as well. I've had to puts one tape on...

I'm wanting a madbull ace socom stock for my g&p and was just wanting to know what size the battery tube is or what 7.4 lipo will fit in there. I've read that madbull number 4 does but I don't what dimensions it is, any help would be appreciated

If they start getting funny about replacing them I'll just send it to zero one my they repaired my other gun and my mate had his upgraded by them, I'm a mechanical engineer so I could probably work it out, but with it being and expensive gun I don't wana do it myself. So you'd recommend some shs...

Have they got a reputation for that happening? Will they fit a non g and p set? This is unbelievably annoying I only got it yesterday ha

i dont think anythings jammed its because i can see the nozzle moving when i look down the hop unit, im only concerned about the warranty from a cost of fixing point of view, if they dont sort it out this week ill just send it to zero one for fixing they've done my old gun before and were quick...

so i got my new g&p m4 yesterday and i love it it was shooting 335fps and 22rps with a 9.6v last night when i opened it, i came to set the hop today and all i get is a horrible grinding sound from the motor like its not connecting with the gears properly ive adjusted the motor height and it...

I'll check the air seal but the bit about the nozzle not making a seal sounds like the culprit I've just looked up the feed tube with a torch and I can't even see the nozzle so I'm assuming it's not up the gearbox

Yea it's a metal hop that I've sort of adapted to fit cus the plastic ones were pretty weak, I thought it might be an air seal issue just wanted a second opinion before I started stripping the gearbox apart, it's got a brand new m100 spring in so it should have pretty decent power. I didn't...

So I fitted a new hop unit (the old one was snapped, 2nd hand gun) to my umarex ump as well a 6.03 barrel and an m100 spring and it was only chronoing at around 200fps which is pretty pathetic although the range was surprisingly good which confused me. I know it's a v3 gearbox and the internals...

Well either way as soon as I get it I'll be swapping the barrel out for the a 6.03mm tightbore as I've got one so i may as well change the rubber while im at it. Any recommendations on the best batteries with these? I've read 7.4v lipos are ideal, I've already got a couple of 9.6v nihm's though...