Recent content by RAM

Hi I have a Wolverine MTW with a inferno gen 2 engine. Long story cut extremely short the Spartan board is dead so I purchased a Gorilla FCU to replace the Spartan and I am wondering if anyone here has done the same and might be able to help me with the settings.  I am a total newb when it...

Well I just checked it and it all looks fine to me. But on a good note I figured out how to get the mags to load without pressing the mag release button. I have to twist the mags slightly for them to slide home. Now I just have to wait for the new nozzle and cylinder head to hope I it solves the...

I thought it was metal i will double check tomorrow. Thanks for the pictures. 

Just had a look at the parts diagram and it looks like the mag release is stock.

Hi the gun is not new it is used. I tried tipping the mags forward as I was loading them and backwards nothing seems to allow them to lock home unless I press the mag release slightly, It only needs to be pressed about 1mm for it to allow the mags to then slip into place, Every mag looks OK to...

Sorry I think my explanation might be misleading. I cant get the mags to lock into the magwell unless I press the mag release as where on my other AEG'S which are M4 platforms I can just push the mags into the magwell and they click into place and lock without having to press the mag release...

Hi I just purchased a Krytac kriss vector and I have to press the mag release to get the mag to load. Is this normal or do I need to check that something is not binding up ? 

Thanks for the idea I did itand it created a small gap to let me see that there was a plate around the back and figure out how to do it which it use a flat head screwdriver and gently lever it forward from the receiver. It was binding on the mock gas tube. Added a photo for reference just...

Hi can anyone help me with solving how to remove the handguard from the Specna Arms SA-V38 (Sailent Arms GRY). I have looked for screws around the outside but can't find any and I have also pulled the pin at the bottom and lifted the catch in the hope that is how you get it off like on the real...

Thanks guys for the help I have ordered from ak2m4.co.uk these parts hoping that I can get it working right for this coming Sunday game at Apocalypse. SHS (RA) M4 Cylinder Head Aluminium (Pad) SHS (RA) Piston Head (Double O-Ring Aluminium) Rocket 15 Tooth Piston

Hi guys I bought a used G&G Armament CM16 LMG which I chronographed last night and was only shooting at 230fps 0.56 joules and decided to change the spring over to a Element M95 spring which got it to roughly 295fps and 0.9 joules. So decided to have a go at Shimming it and also give it a...

@Rogerborg thanks very much for the help I will give it a go with the velcro and hopefully it will stop being a pain in the neck. Apart from that issue I'm loving using it and had a blast on Sunday with it at Apocalypse which was the 1st time I got to use it.

Hi guy can anyone give me an idea to what is causing this problem. I bought some Bolt mid cap magazines for my ARP 556 which is brand new and unless the magazine in pulled back towards the grip it won't fire any BB's out if I eject the magazine it drops about 4 BB's. If the magazine if slightly...

Thanks guys for the help and suggestions I will look at getting the MK23 too.

was just wanting to get a it a little quiter for when playing CQB and needing to be a bit of a Sneaky SOB as I know I was getting spotted easier because of the noise from the hog. If the Silent piston heads are not that good would you recommend something else ? One day I might be able to get a...