Recent content by Marco

  1. M

    3d printing

    Anyone could please help me 3d printing some accessories? Or point me to any 3d printing services for airsoft? Thank you
  2. M

    Selling my collection?

    Hey guys, After over 25 years I have decided to stop playing airsoft. I have already sold half of my guns recently and now I want to sell the remaining ones. I was wondering if  you know  anyone that could be interested in a bulk buy and how much I could sell it for.  There too much to...
  3. M

    Thanks for the info. I have PC and Mac (with BT) and can't access it on both machines. I'll...

    Thanks for the info. I have PC and Mac (with BT) and can't access it on both machines. I'll check that dns guide
    • Marco
    • Profile post comment
  4. M

    I haven’t be able to access it for months

    I haven’t be able to access it for months
    • Marco
    • Profile post comment
  5. M

    Issue with G26 (marui) not cycling and firing properly

    So I changed the hammer spring but it  didn't fix the issue, I swapped the whole hammer  assembly with a kjw one but the problem persisted.  I'll start check the slide assembly now. Anyone can suggest a technician that service GBB guns?  
  6. M

    Issue with G26 (marui) not cycling and firing properly

    It seems so, btw i have changed the knocker lock spring too, the previous one one a bit bent. I'll do more experiments this week end, thanks   
  7. M

    Issue with G26 (marui) not cycling and firing properly

    I only changed the recoil spring  because of the issue. Apart from the nozzle the gun was stock.  Yes the springs are all a guarder set.
  8. M

    Issue with G26 (marui) not cycling and firing properly

    Hammer spring is still the original one. I'll try swapping it with the guarder one.  
  9. M

    Issue with G26 (marui) not cycling and firing properly

    Thanks. Yes same issue with all the mags. I have now changed the  nozzle spring too and the issue still persists. i have also added a new recoil guide and springs (guarder) I'll move next to the  trigger bar and spring, then the hammer set. 
  10. M

    Kwa USP match, slide not locking after emptying a mag, sometimes misfires

    I have the same issue with my g26 (couple of threads below yours ) "Issue with G26 (marui) not cycling and firing properly". It's definitely not the magazine. I have already changed few parts with no results. I'll try this week end swapping more bits and see what's going on. I'm trying a...
  11. M

    Issue with G26 (marui) not cycling and firing properly

    Yes I have. Thanks
  12. M

    Issue with G26 (marui) not cycling and firing properly

    The gun is cycling but not all BBs are coming out.Also If you look at the video the magazine is empty and its not locking In empty position.I have changed the recoil spring guide and springsI have changed the nozzle but the problem still persistsThe trigger bar and spring seem ok, so the...
  13. M

    Is the Tippmann M4 milspec?

    Ok, so to reply to my own question, yes it is. I just installed a magpul Milspec stock and fits perfectly 
  14. M

    Is the Tippmann M4 milspec?

    And in particular the stock? Thanks
  15. M

    HPA bottle testing

    This is very helpful. Thanks. I’ll compare the marks later.
See more
Back
Top