Recent content by emit

Oh no, £11  for 800ml green gas+ 350bbs per mag ?.  I wonder if converting to hpa would work out cheaper in the short to medium term?

I'm looking to get a We 350 round green gas drum mag for my AAP-01. Does anyone know how much green gas these go through? How many rounds can I expect to get out of a regular sized gas bottle?

Thanks, it was indeed slightly missaligned by one tooth. All working as expected for now.

I tried installing the Rocket cylinder head and nozzle. The cylinder head was too tight for the stock cyma cylinder and it ripped the o rings so went back the original head, loads of silicone grease and the rocket nozzle. With the gun assembled it seems to shoot well again other than the fact...

Thanks for the tips! With the nozzle extended I can't get any compression in the cylinder.  I ordered a new nozzle of the same length and a new cylinder head just to be safe. I noticed some wear on the nozzle of the cylinder head and a difference in external diameter from 5.2mm nearer the tip...

Hi, During the last skirmishing session my CM045 seemed to lose considerable power.  I opened it up and found the cylinder head was worn out. Replaced it and the nozzle and it works great now.

I bought a used Novritsch SSE18 AEP with a 7.4V 550mah battery. With a battery fully charged it shoots single and auto as expected when tested indoors. Storing the pistol in the shed where the temp is in the low 2-10 degrees Celsius if I try to shoot on single it doesn't seem to have the power...

The Cyma CM045 I love mine to bits. It's realy well made. Here it is with mismatched wooden grips. Thanks for the opportunity to show her ? Snappy trigger response in semi making it decent for CQB with only a 7.4v lipo. I've just added a mosfet to mine and on an 11.1v lipo and no other mods...

I did that in the end, I popped in a 500mah lipo.

I installed the coiled 2 core 0.75mm cable and although I can now hear the motor labouring to turn it doesn't quite manage to compress the spring. 1mm core might be the minimum.

The one that didn't work was definitely not 0.75. It looked like it didn't have more wire strands than a signal cable on a mosfet and a fabric string intertwined.

Do you have a photo of what the end result looks like?

I ordered a £10 coiled cable with 2 cores of 0.75mm diameter each. Will provide an update on how it works once I install it.

I've wired a mosfet in the grip of my JG V61 and wanted to run it with a lipo stored in a pouch by connecting it through a coiled cable. I bought a coiled shaver charging cable, wired it with deans and connected it to the 7.4V lipo battery and mosfet. The gun fires fine when the battery is...

Any takers for a used nearly stock SSG10 A1 for a bargain £400? Why buy new? https://prefired.co.uk/ads/novritsch-ssg10-a1-with-scope-used-twice/