Recent content by Alkany

At Brill Armory in the US. V2s are sold out as of now, but if you happen to have a gun with a V3 gearbox, there should still be some stock.

Hey guys, I recently got the Black Talon Concepts Chimera MK.II Smart Trigger-Unit. Best upgrade ever for any V2 or V3 AEG. Performs much better than the ASCU. Check my video for more info: https://www.youtube.com/watch?v=P95tl0z2ANs Best regards, Alex

To make everything complete I also did a video guide on how to upgrade the Gearbox of the WE Katana with Siegetek gears and the ASCU. Check it out here: http://www.youtube.com/watch?v=COnv28SOxdY

Hey guys, I have put together a guide that shows how to upgrade a PTW clone successfully as I have recently tuned my A&K MK4 PTW, I also mention recommended parts that give you a performance that is right up to Systema standard. http://www.youtube.com/watch?v=08P4u7RSsek If you do have...

I have done a little tutorial on how to upgrade the Cylinder of the Katana to make it last a lot longer. Check it out: https://www.youtube.com/watch?v=_6kduhS1J1s

Hey guys, Here is my detailed long-term review of the WE Katana M4A1 pointing out all design flaws and recommendations to make it last a while. Also included is a short comparison to the A&K M4A1 PTW clone. http://www.youtube.com/watch?v=71BUQTChDx4 Tuning List: Modify Gearset Smooth...

That is partially due to the fact that its only about 3 degrees Celsius outside in Austria at the moment. I was shooting from inside, but the room cooled down fast. Under perfect conditions Im sure the MP7 will perform better although I think it will still have cooldown issues.

So since I didnt provide any information at all with the Blowback test video, I have made a short review in English that covers most of the innovations about the VFC MP7A1 Navy. http://www.youtube.com/watch?v=Pqk6oIGXxb4 Can an admin please edit the title of this topic and add Review as well...

Indeed. I was considering the possibility to use it as a secondary with my semi-sniper in the woods, with it being kept in a thigh holster. Not sure if I want to do that now since its so big :)

Considering that they postponed the release date of the MP7A1 Navy twice I am confident that they did at least work out the initial flaws they encountered. Unlike the HK416 GBB, in which case they seemed to have released a "prototype" and it took them three generations to solve some of the...

Much appreciated and I will definitely take it into consideration :) Yes, I also own one of their AEGs, the HK416. However, I was not so sure about their Gas Blowback range as there is a lot of bad talk about the M4s and HK416s. In any case, I just could not resist their MP7 :)

Thanks, man. I have done a review on the gun, but unfortunately in German which is also to be found on my channel. If I get enough requests I might do one in English as well. Moreover, if you have any questions concerning the gun I am more than happy to answer them :)

Hello all, I just wanted to share with you a quick demonstration of the new VFC MP7A1 Navy GBB. It is under license by Umarex and is a 1:1 replica of the real steel counterpart. Unlike the KWA MP7 which is slightly smaller than the real one. The VFC version also has a almost twice as much kick...

These are Sunon 20x20mm fans, mainly used for graphics card and smaller chipsets. I think there are even smaller ones, like 10x10mm. The link to where I bought them is actually in the video description on Youtube, but here you go...

There are so many products with anti-fog coatings out there, and they can get quite expensive as well. None of them work a 100% as stated above. I have tried out many combinations, none of them worked so far. Until I did this. I used an old pair of goggles and integrated two small graphics card...