- Condition
- Used
- FPS
- 350
WE AK 105 conversion GBBR
Externals:
-5ku Sport 1 Kit
-MOE AK+ Grip
-Airsoft Artisans MCX Stock on 1913 adapter (screw for stock is stripped but probably can still be removed i just cba)
-LCT 105 FSB, RSB, Gas Tube, Lower Handguard Retainer, Railed Top Cover.
-WE AKM Barrel cut down to 105 length.
- 5KU DTK-2
- Asura dynamics PK5
-3D printed PETG Carbon fibre RK-0L
- rubber Basis rail covers
Internals:
-NPAS Valve
- WE Recoil Buffer
-Hephaestus steel FCG (hammer removed but included as can be repaired)
-New steel hammer installed
-renegadecow hammer spring
-6.05x330mm Barrel
-Mapleleaf Rubber
-New recoil spring and recoil guide rod
Comes with
-4x 545 gas mags (some shells beginning to split but work fine- nothing some tape/ epoxy can’t prevent)
-1x 7.62 for spares (valves used as donor for HPA adapter -no shell)
- brand new AirTac HPA low profile adapter new gen
-5x Cyma 545 mags
-speed loader adapter
-2x spare nozzle 1 with RA tech NPAS
-2x spare stock hammer spring
-3x basis rail segments
Built like a tank with heavy recoil, especially on HPA, gas piston has been modified to work with LCT gas tube. Currently set to 1.15 J on 0.32 on 95 PSI.
£525 collected or P+P
Externals:
-5ku Sport 1 Kit
-MOE AK+ Grip
-Airsoft Artisans MCX Stock on 1913 adapter (screw for stock is stripped but probably can still be removed i just cba)
-LCT 105 FSB, RSB, Gas Tube, Lower Handguard Retainer, Railed Top Cover.
-WE AKM Barrel cut down to 105 length.
- 5KU DTK-2
- Asura dynamics PK5
-3D printed PETG Carbon fibre RK-0L
- rubber Basis rail covers
Internals:
-NPAS Valve
- WE Recoil Buffer
-Hephaestus steel FCG (hammer removed but included as can be repaired)
-New steel hammer installed
-renegadecow hammer spring
-6.05x330mm Barrel
-Mapleleaf Rubber
-New recoil spring and recoil guide rod
Comes with
-4x 545 gas mags (some shells beginning to split but work fine- nothing some tape/ epoxy can’t prevent)
-1x 7.62 for spares (valves used as donor for HPA adapter -no shell)
- brand new AirTac HPA low profile adapter new gen
-5x Cyma 545 mags
-speed loader adapter
-2x spare nozzle 1 with RA tech NPAS
-2x spare stock hammer spring
-3x basis rail segments
Built like a tank with heavy recoil, especially on HPA, gas piston has been modified to work with LCT gas tube. Currently set to 1.15 J on 0.32 on 95 PSI.
£525 collected or P+P
